©2019 JBT LEKTRO, INC. All rights reserved.
October 2019
B-3
APPENDIX B: RECEIVING
B.2
RECEIVING, SETUP, AND RUN-IN
This section describes how to set up your new LEKTRO 88/89 Series tractor and how to
properly run it in to help prolong its useful life while ensuring maximum battery usability and
minimizing future maintenance needs.
WARNING
ALL PERSONNEL RESPONSIBLE FOR OPERATING, MAINTAINING, AND/OR
REPAIRING THE LEKTRO 88/89 SERIES TRACTOR MUST READ, UNDERSTAND,
AND COMPLY WITH ALL APPLICABLE COMPONENT SUPPLIER INSTRUCTIONS,
WARNINGS, AND SAFETY DATA SHEETS (SDS) CONTAINED IN THE SERVICE
MANUAL BEFORE PERFORMING ANY OF THE TASKS DESCRIBED IN THIS
SECTION.
B.2.1
RECEIVING CHECK
When you receive a new LEKTRO 88/89 Series tractor:
1. Inspect the tractor thoroughly before accepting it from the shipper.
2. Remove all wrappings and look for structural and component damage, battery electrolyte
spill corrosion in the battery compartment and any misaligned components caused by tie-
down stress, vibration, and/or impact during shipping.
3. Verify that all attachments, adapter, and charger items detailed in the
LEKTRO Component
Location For Shipping Confirmation
list are on hand and checked off before signing.
4. Check the packing list for any additional pre-operation instructions that are not included in
the
Operation Manual
.
5. Pull the Main Power Disconnect knob to the ON position, turn the Motive Power Switch ON,
and then verify that all primary and motive controls described in
are functioning properly and to verify that there is no hidden
transportation damage.
6. In the event of transportation damage or loss, it is your responsibility to file a claim with the
shipping company. Failure to do so could result in the shipping company denying your claim.
B.2.2
POST-DELIVERY INSTALLATION
88/89 Series tractors may ship with some or all external components removed, depending on
the mode of transport, packaging needs, customer instructions, and shipping exposure
protection. If your 88/89 shipment includes any removed external components, then refer to the
appropriate section(s) in the 88/89 Series
Service Manual
for step-by-step instructions.
AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - [email protected]
