31
VTX B
18
| User Manual
13 - CARDIOID PRESETS IN PERFORMANCE MANAGER
The JBL Performance Manager software application can be used to select the appropriate factory preset for any subwoofer configura-
tion. Using Performance Manager, cardioid presets can be freely selected on a per amplifier channel basis to match the configuration
and layout needed.
STEPS:
• Navigate to the “Add Speakers” mode and drag-and-drop the necessary amount of B18s to the venue
• Using the “Device View” selection control, switch the view to “Orientation”
• Use “R” (REAR) and “F” (FRONT) switch buttons to reverse the orientation
• Switch the “Device View” back to “Bandpass” view
1
2
3
4
Once the orientation has been selected, Performance Manager assigns the appropriate corresponding factory preset to the amplifier
channel(s) assignment with the selected B18. When B18s are grouped together on one amplifiers channel a common F/R switch is pre-
sented for the group. Cardioid arrays created in the JBL Line Array Calculator application can be imported into Performance Manager
and all cardioid parameters are maintained.
TIP:
The latest version of Performance Manager and Line Array Calculator can be downloaded at www.jblpro.com. Alter-
natively, the check for updated function can be used within the application.
Summary of Contents for VTX B18 Series
Page 1: ...VTX B18 User Manual...
Page 39: ......
