42
VTX A
8
| Rigging Manual
10 - DISASSEMBLING AN A8 ARRAY
STEPS:
• To de-suspend an A8 array, begin by safely lowering the entire array to a working height.
• Press the Release Buttons on all four lower cabinets to unlock the rigging mechanism. This will enable the bottom four cabi-
nets to collapse back to the 10-degree position once the array is lowered to the ground.
• Attach the VT to the bottom cabinet by first connecting the front (or rear) two points and then lifting the other side of the VT to
attach the other two points.
10.1 - OPEN THE ANGLE LOCKS AND ATTACH THE VT
1
2
3
3
1
2
