38
VTX A
8
| Rigging Manual
STEPS:
• Raise the suspended cluster of VTX A8 cabinets and align the next cart of cabinets underneath the suspended cluster.
• Once the two clusters are aligned, carefully lower the suspended cluster until the front attachment points are nearly touching.
Ensure that the attachment points are aligned and then lower the suspended cluster until the front attachment points come
together. Insert the two front QRP’s.
9.4 - ATTACH THE NEXT STACK
CAUTION:
• Always ensure each cabinet is pinned to the same angle on each side of the enclosure.
• The topmost cabinet in each array should be pinned in accordance with the Array Frame and Extension Bar position-
ing instructions in section 9.6.
1
2
2
