33
VTX A
8
| Rigging Manual
8.9 - EXTENSION BAR USE CASES
The VTX A8 Array Frame can be deployed in a number of configurations with one or two VTX A8 Extension Bars. It is important to note
that only certain configurations are correct and safe for suspension of VTX A8 and B18 arrays. The images below illustrate proper con-
figurations for attaching VTX A8 Extension Bars, and where suspension points should be attached to the Extension Bars. Suspension
points should never be connected horizontally across two extension bars.
SINGLE POINT
CAUTION:
When multiple suspension points are used, always make sure all suspension points are evenly or properly
loaded.
DUAL POINT
FRONT-TO-BACK
DUAL POINT
SIDE-BY-SIDE
FOUR POINTS
DUAL POINT USING BRIDALS
FRONT-TO-BACK
DUAL POINT / QUAD
SIDE-BY-SIDE
