31
VTX A
8
| Rigging Manual
8.7 - USING DUAL EXTENSION BARS
The VTX A8 Array Frame can be used with either one or two Extension Bars. The Array Frame ships from the factory with one Extension
Bar and an additional Extension Bars can be purchased and used in scenarios where side-by-side suspension points are needed.
The standalone version of the Extension Bar (Part# VTX A8 AF EB) includes one Extension Bar, two additional QRP’s and all hardware
needed (tabs, bolds and nuts) for mounting to the VTX A8 Array Frame. The additional attachment tabs must be installed to the outer
Extension Bar locations using the manufacturer-supplied bolts and locking nuts.
TOOLS REQUIRED:
Attaching the extension bar connection tabs is a one-time operation. To properly install the tabs,
two wrenches are needed. A
1/2” wrench
should be used for the nut and a
7/16” wrench
for the bolds. All necessary
hardware is included with the VTX A8 AF EB.
