JBL VP7212 Technical Manual Download Page 1

JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329  U.S.A.

JBL VP7210/95DPC 

REV C

11-11

Technical Manual

JBL VP7212/95DPC

SPECIFICATIONS

ACOUSTIC & ELECTRICAL SPECIFICATIONS:

•  Frequency Response:

65 Hz - 18 kHz (±3 dB)

• Frequency Range:

55 Hz - 20 kHz (–10 dB)

•  Maximum Peak Output:

134 dB SPL 1m

• Coverage Pattern:

90º x 50°

• Directivity Factor (Q):

12.6  

• Directivity Index (DL):

11 dB  

TRANSDUCER SECTION:

• Cabinet:

Enclosure (Not for Sale)

• Grille:

365659-001

• Low Frequency Driver:

2262FF, 304mm (12 in) dia., 76mm 
(3 in) Dual Coil neodymium Differential
Drive

®

, Direct Cooled

•  Bandpass Nominal Impedance: 2 x 2 ohms
• High Frequency Driver:

2452H-SL, 100mm (4 in) titanium 
damped diaphragm, 1.5 in exit, 

•  Bandpass Nominal Impedance: 8 Ohms

SYSTEM:

• DPC1 Internal Amplification 

1750W Peak, 875W Continuous

Output (at nominal load):

• DPC1 Output:

750 LF/125 HF Watts (Continuous 
IEC shaped pink noise into rated load 
impedance)

• DPC1 Output Section:

LF: Dual Bridged Technology™, Class D
HF: Bridged Class D 

SYSTEM CONT’D:

•  Audio Input Connector:

XLR with loop-through

• User Controls:

80 Hz Subwoofer High Pass Filter.
Enable / Disable 0-16 dB input 
Attenuator w/ 32 precision 0.5 dB steps

•  Signal Processing:

DSP based, resident in Input Module

•  System Management:

DSP based limiters for mechanical 
and thermal protection

•  AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
• AC Line Voltage:

50/60 Hz, User Selectable; 120V/240V
(-15%, +10%)

• AC Input Connector:

Neutrik PowerCon (NAC 3MPA)

•  AC Look-thru:

Neutrik PowerCon (NAC 3MPB)

•  AC Current Requirement:

6A per system at 120V, 3A/system at 
240V

AURAL SWEEP TEST SPECIFICATIONS:

A. System Aural Sweep Test:

150mV Input, 20 Hz to 20 kHz
Volume control clockwise

B. L.F. Aural Sweep Test:

7V Input, 10 Hz to 1 kHz

C. H.F. Aural Sweep Test:

2.5V Input, 300 Hz to 20 kHz

PHYSICAL SPECIFICATIONS:

• Enclosure Dimensions:

533 x 358 x 334 mm

(Height x Width x Depth)

21.0 x 14.1 x 13.1 in

• Net Weight:

47 lb (21.3 kg)

WARRANTY INFORMATION:

• Refer to Warranty Statement packed with each product.

Warranty 59660

Owners Manual
363642-003

Carton (1)
365664-001

Top/Bottom Set Filler (2)
365662-001

Face Pad Filler
365663-001

PKG, Microfoam (4)
49790P

Power Cord Assy Pack
355040-002

PACKAGE

WIRING DIAGRAM

SCHEMATIC

Driver, Low Freq.
2262FF
(363946-001X)
Cone Repl 
C2X2R2262

Wire Harness
363640-001

Driver, High Freq.
2452H-SL
(352328-003X)
Diaph Repl 
D8R2452-SL

Yel/Blk

Yel

Blu/Blk

Grn

Blu

Grn/Blk

Reviews: