Pg 8
JBL TT350 Classic Owner's Manual EN
Playing Records
1.
Remove your record from the sleeve and place it on the platter, locating it in place with the centre pin.
2.
Remove the stylus guard from the cartridge to reveal the needle.
3.
Ensure your amplifier is on and the Phono input is selected.
4.
Start the turntable with the 33 button. Raise the speed to 45 rpm if your record requires it.
5.
Unclip the Arm lock.
6.
Raise the arm lift to raise the tonearm.
7.
Cue the tonearm over the run in groove of the record (or the start of the track you wish to play).
8.
Lower the arm lift. The tonearm will slowly lower down onto the record.
At the end of the record, lift the tonearm with the arm lift, and return the arm to the rest. You can now stop the
platter by pressing the 33 button, and change the record.
