MTC-CBT-SUS3
Suspension Bracket for CBT Speakers
CAUTION:
Installation must be done by qualified persons
using safe rigging standards.
The installer is responsible for proper selection and use of
mounting hardware to properly and safely suspend the speakers.
90
[3.5]
219
[8.6]
Ø 15 [0.62] dia (x3)
Clip Points
M8 Clearance Holes (x4)
for CBT 1000, 1000E
M6 Clearance Holes (x4)
for CBT 50LA-1, 100LA-1, 200LA-1
M6 Clearance Holes (x4)
for CBT 70J-1, 70JE-1
Included:
2 x MTC-CBT-SUS Brackets
8 x M6 x 20 mm PAN HEAD BOLTS (for CBT 50LA-1, 100LA-1, 200LA-1, 70J-1, 70JE-1)
8 x M8 x 20 mm PAN HEAD BOLTS (for CBT 1000, 1000E back panel)
8 x M8 x 40 mm PAN HEAD BOLTS (for CBT 1000, 1000E top or bottom end-cap)
8 x M6 FLAT WASHERS and 8 x M6 LOCK WASHERS
8 x M8 FLAT WASHERS and 8 x M8 LOCK WASHERS
Step 1:
Find the locations of the mounting hole pattern on the bracket that correspond with the specific CBT
loudspeaker model. Note the correct hardware size (M8 or M6) that correspond with that model.
Dims in mm [in]
30°
