JBL BAR 5.0 MULTIBEAM, User Manual

Page: 16 / 24

16 16
7. PLAY
7.1 Play from the TV source
With the soundbar connected, you can enjoy TV audio from the
soundbar speakers.
TV
OPTICAL
HDMI eARC/
HDMI ARC
1. Make sure that your TV is set to support external speakers
and the built-in TV speakers are muted. Refer to the owner’s
manual of your TV for more information.
2. Make sure that the soundbar has been properly connected
to your TV (See “5.1 Connection with your TV and digital
devices” in the “5. CONNECT” chapter).
3. To select the TV source, press on the soundbar or on
the remote control.
→
“ ”: The TV source is selected.
• In the factory settings, the TV source is selected by default.
NOTES:
− If the soundbar is connected to your TV through both an HDMI cable
and an optical cable, the HDMI cable
source is selected for the TV
connection.
7.1.1 TV remote control setup
To use your TV remote control for both your TV and the soundbar,
check that your TV supports HDMI-CEC. If your TV does not
support HDMI-CEC, follow the steps under “TV remote control IR
learning”.
HDMI-CEC
If your TV supports HDMI-CEC, enable the functions as instructed
in your TV user manual. You can control the /-, mute/
unmute, and power on/standby functions on your soundbar
through the TV remote control.
TV remote control IR learning
Through IR learning, your Infra-red TV remote control can learn
some commands of the soundbar.
1. On the soundbar, press and hold and + until “ ”
is displayed.
→
You enter the TV remote control learning mode.
2. Within 15 seconds, do the following on the soundbar and your
TV remote control:
a) On the soundbar: press one of the following buttons +, - ,
+ and - together (for the mute/unmute function), and .
b) On your TV remote control: press the desired button.
→
“ ” is displayed on the soundbar.
→ “ ”: The function of the soundbar button is learnt
by your TV remote control button.
3. Repeat Step 2 to complete the button learning.
4. To exit the TV remote control learning mode, press and hold
and + on the soundbar until “ ” is displayed.
→ The soundbar returns to the last selected source.
7.2 Play from the HDMI IN source
With the soundbar connected as shown, your digital device can
play video on your TV and audio from the soundbar speakers.
1
HDMI IN
HDMI OUT
(TV ARC/TV eARC)
HDMI OUT
2
.
.
.
HDMI (ARC)
1. Make sure that the soundbar has been properly connected to
your TV and digital device (See “5.1 Connection with your TV
and digital devices” in the “5. CONNECT” chapter).