JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.
JBL A
W595/-BK
REV A
PACKAGE
WIRING DIAGRAM
02-12
Technical Manual
JBL AW595/-BK
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impediance:
8 Ohms
• Long-Term System Power
Rating (IEC):
600W, (2400W Peak),100 hrs
• Frequency Response (±3 dB):55 Hz - 19 kHz
• Frequency Range (-10 dB):
35 Hz - 20 kHz
• Maximum SPL:
Passive Mode:
128 dB-SPL cont avg (130 dB peak)
• System Sensitivity:
Passive Mode:
100 dB SPL, 1 Watt @ 1 Meter
• Passive Crossover
Frequency:
1.2 kHz
SYSTEM COMPONENTS:
• Cabinet:
Enclosure (Not for Sale)
• Grille:
445176-001 (BK), 445176-002 (Gray)
• Low Frequency
2265H, 380 mm (15 in) Differential
Transducer:
Drive
®
driver with 75 mm (3 in) dual
voice coil
• DC Resistance:
5.10 ohm +/- 10%
SYSTEM COMPONENTS:
(CONT’D)
• High Frequency
2432H, 38 mm (1.5 in) exit
Transducer:
compression driver, 75 mm (3 in)
vice coil
• DC Resistance:
4.0 ohm +/- 2 ohm
• Crossover Network:
5004551
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test:
7V Input, 10 Hz to 10 kHz
B. L.F. Aural Sweep Test:
15.0V Input, 10 Hz to 100 Hz
C. H.F. Aural Sweep Test:
3.0V Input, 300 Hz to 1.0 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions:
485 x 810 x 478 mm D
(horizontal orientation):
(19.1 x 31.9 x 18.8 in.D.)
• Shipping Weight:
62.5 lb (28.3 kg.)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
Warranty
59660
Network
Assembly
5004551
Wire Harness
44350-001
Driver, High Freq.
2432H
(365512-001X)
Diaph Repl
D8R2432
Driver, Low Freq.
2265HPL
(338343-003X)
Cone Repl
C8R2265
YEL
YEL/BLK
GRN
GRN/BLK
NOTE: INDIVIDUAL PARTS FOR THE ABOVE CROSSOVER ARE NOT AVAILABLE.
A COMPLETE REPLACEMENT ASSEMBLY SHOULD BE ORDERED.
SEE NETWORK SCHEMATIC (5004551) PAGE 2
SEE WIRE HARNESS DIAGRAM (446350-001) PAGE 3
Owner’s Manual
5012278
Carton
5012263
Filler (2)
5012264
PKG, Mircofoam (6)
49790P
70V/100V Transformer Taps: 70V: 400W, 200W, 100W
100V: 400W, 200W
