background image

 

 

CONTENTS – DV-6EDC 6 CFM ELIMINATOR DC VACUUM PUMP

Introduction                             2

Motor Specifications                                      2

Operation                                                             2

Pump Maintenance                                         2

Repair Parts                             3

Troubleshooting                        4

Return for Repair                        4

Warranty                                4

WARNING: 

UNIT DRAINED OF OIL 

FOR SHIPMENT. DO NOT OPERATE 

WITHOUT ADDING OIL.

                                                                    OPERATING MANUAL

6 C

FM

ELIMINATOR

®

 DV-6E

DC

CFM 6 CFM

MOTOR

1/2 HP, DC

VOLTAGE

115v/230v

INTAKE PORT

1/4" x 3/8"

OIL CAPACITY

25 oz

WEIGHT

24 lb

Summary of Contents for ELIMINATOR DV-6E-250SP

Page 1: ...2 Pump Maintenance 2 Repair Parts 3 Troubleshooting 4 Return for Repair 4 Warranty 4 WARNING UNIT DRAINED OF OIL FOR SHIPMENT DO NOT OPERATE WITHOUT ADDING OIL OPERATING MANUAL 6 CFM ELIMINATOR DV 6EDC CFM 6 CFM MOTOR 1 2 HP DC VOLTAGE 115v 230v INTAKE PORT 1 4 x 3 8 OIL CAPACITY 25 oz WEIGHT 24 lb ...

Page 2: ...ive you years of reliable service ELIMINATOR pumps are designed for deep vacuum work in air conditioning and refrigeration systems Adding Oil Step 1 Slowly add oil until level rises to the top of the oil level line Figure 1 Step 2 Replace oil fill plug If oil level is too low you will hear air out of the exhaust If oil level is too high excess oil will be blown out of the exhaust IMPORTANT Use oil...

Page 3: ... NFT5 4 1 4 O ring cap 16 NFT5 6 3 8 O ring cap 17 PR 501 1 2 Rubber grip and cap 18 PR 22 Oil fill plug w o ring 19 PR 40 Stainless steel splash guard w screw 20 DV EP8 1 2 Red tethered safety exhaust cap 21 PR 205 3 8 Cushioned handle PR 65 1 2 Cushioned handle REF NO PART NO DESCRIPTION 1 PR 1 Sight glass 2 PR 2 Oil drain valve 3 PR 10 DV 3E DV 4E and DV 6E cover assembly w sight glass drain va...

Page 4: ...r switch not on C Pump temperature below 30 F D Pump has not been shut down properly A Plug power cord in securely B Turn motor switch to ON position C Warm up pump to 30 F and turn motor switch on D Follow proper start up and shut down procedures Pump won t pull deep vacuum In order for your pump to pull to a near perfect vacuum oil must be clean and moisture free throughout evacuation A Contamin...

Reviews: