ENGLISH
OPERATION
MANUAL
JB SYSTEMS®
1/20
LEDCON-01 remote
Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these
operating instructions very carefully.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
•
Remote controller for:
•
LED MANAGER
•
LED SPOT & LED WASH
•
LED BALL
•
Different working modes:
•
Fixed color mode: Instant access to 9 pre-programmed colors
•
Static chase mode: 12 different color chases with manual speed control
•
Sound chase mode: 12 different color chases with audio triggering
•
Spectrum mix: 32 different spectrum mix colors, including color fades
•
Adjustable speed and dimming with fader
•
Blackout and “Full on” function
BEFORE USE
Check the contents:
Check that the carton contains the following items:
•
LEDCON-01 remote controller
•
AC/DC adapter
•
Operating instructions
Some important instructions:
•
Before you start using this unit, please check if there’s no transportation damage. Should there be any, do
not use the device and consult your dealer first.
•
Important:
This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
•
Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
•
To protect the environment, please try to recycle the packing material as much as possible.
ENGLISH
OPERATION
MANUAL
JB SYSTEMS®
2/20
LEDCON-01 remote
SAFETY INSTRUCTIONS:
This symbol means: indoor use only.
•
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
•
To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
•
This unit is for indoor use only.
•
Don’t place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be
placed on this appliance. Electric shock or malfunction may result. If a foreign object enters the unit,
immediately disconnect the mains power.
•
No naked flame sources, such as lighted candles, should be placed on the appliance.
•
Prevent use in dusty environments and clean the unit regularly.
•
Keep the unit away from children.
•
Inexperienced persons should not operate this device.
•
Maximum save ambient temperature is 45°C. Don’t use this unit at higher ambient temperatures.
•
Always unplug the unit when it is not used for a longer time or before you start servicing.
•
The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
•
Check that the available voltage is not higher than the one stated on the rear panel of the unit.
•
The socket inlet shall remain operable for disconnection from the mains.
•
The power cord should always be in perfect condition: switch the unit immediately off when the power cord
is squashed or damaged.
•
Never let the power-cord come into contact with other cables!
•
In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user
serviceable parts inside.
•
In the event of serious operating problems, stop using the appliance and contact your dealer immediately.
•
Please use the original packing when the device is to be transported.
•
Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
MAINTENANCE
Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside the unit. Do not
use volatile liquids such as benzene or thinner which will damage the unit.
