JB-Lighting SPARX 10, Operating Instructions Manual

Page: 40 / 72

- 40 -
10
2. Introduction
3. Installation
WARNING: This device is for professional use only! Protection rating IP 20 - only
indoor use
WARNING: LED Radiation - do not look into the beam at a distance of less than
5 meters (197 inches) from the front surface of the product. Do not view the light
output with optical instruments or any device that may concentrate the beam. LED
class 3 according to EN 62471.
WARNING: JB-Lighting Lichtanlagentechnik GmbH does not authorize or warrant
its products for use in life support systems. Life support systems are equipment in-
tended to support or sustain life, and whose failure to perform, when properly used
in accordance with instructions provided, can be reasonably expected to result in
personal injury or death.
This product conforms to the European Community Directives:
- Low voltage directive 2014/35/EU
- Electromagnetic compatibility 2014/30/EU
ATTENTION: Cet appareil ne convient que pour un usage professionnel! Degré de
protection: IP 20
ATTENTION: Rayonnement LED - Ne pas regarder le faisceau à moins de 5m ou à
l‘aide d‘un instrument à optiques. LED classe 3 selon la norme DIN EN 62471
ATTENTION: JB-Lighting Lichtanlagentechnik GmbH n‘autorise pas l‘utilisation
de leurs appareils dans des systèmes ou dispositifs permettant le maintient en vie.
Sont considère systèmes ou dispositifs de maintient en vie tous systèmes qui ont
pour but de maintenir la vie ou de la stabilisée et qu‘un défaut ou défaillance éven-
tuelle de celui-ci ne blesse ou entraine la mort d‘autrui.
Le produit décrit dans ce manuel est conforme aux directives Européennes suivantes:
- Directive appliquée à la Basse Tension 2014/35/EU
- Directive CEM 2014/30/EU
!
!
2.2 Unpacking
2.1 Safety instruction
This package contains the Sparx10, two omega brackets with 1/4 turn fasteners, this manual
(one per shipment) as well as a power cable with PowerCon connector (no cable in US model).
Open the top of the box and remove the inlay. Remove the unit from the box. For any damage
occurring during transport, report to the transport company immediately.
WARNING: To ensure proper installation of the plug consult a qualified technician!
ATTENTION: Installation de la connexion au réseau doit être effectuée par un pro-
fessionnel!
!
3.1 Connection to Mains
!
!