JB-Lighting P18 MK2 Wash HP, Operating Instructions Manual

Page: 34 / 40

- 34 -
P18 MK2 Wash
7.4 Cleaning the device
You should check the function of the fans in
the head and foot at regular intervals. Above all,
make sure that the air intakes and the interior
of the P18 MK2 Wash are free of fluff and dust.
To do this, open the head cover (4x camlocks (4)
with half a turn) and the base plate on the foot.
You can clean the P18 MK2 Wash with a brush
and a vacuum cleaner. In addition, you can
remove the gobo insert (1) and the shutter slide
insert (2) by loosening the knurled screws (3) and
sliding the focus carriage towards the lens. Then
you can clean the colour filters, glass gobos and
CMY panes with a soft cloth and a little window
cleaner. To clean the frost flaps, prisms and zoom/
focus unit, remove the three Phillips screws (Fig.
4) and then the zoom cover (see Fig. 5). Ensure
that you do not bend or damage any parts during
cleaning. When cleaning is complete, reconnect
the flap, replace the Phillips screws (4) and return
the inserts to the unit.
(4) (5)
22
11
33