Jayco JAY FEATHER Towables 2021 Owner'S Manual Download Page 88

Page: 88 / 177

Section 6: Electrical System

BMPro MINI SYSTEM (If So Equipped)

The Jay Command BMPro Mini is a small con-

trol panel used to monitor and control various

systems in your RV.
The system has 3 parts: the NODE, the DIS-

PLAY and the JayCommand Smartphone App.

The mini control panel and the Smartphone

App connect to the NODE via Bluetooth. The

JayCommand App is available for download

for Iphone or Android devices through Google

Playstore or the App Store. (Search “JayCom-

mand” )
The Jay Command Mini has WiFi capabilities to connect to the internet to download the

latest app updates.
The following list describes some of the many features this system may control.

Check the

Table of Contents

in this manual to identify your Bluetooth system and more

specific information on system operation.

A digital version of the operator manual may be included with the system. On the HOME

screen (upper right corner) press the SETTINGS button (the small Gear icon) then scroll the

screen down with your finger until you see USER MANUAL. Tap on it to open the manual.

As you scroll through the manual, to return to the beginning, tap the screen and a drop down

appears at the top of the screen. Select the back arrow at the top left to return to the menu

screen. To get back to the display HOME screen, press the left facing triangle button at the

bottom of the screen.

NOTE:

Switches that are turned on with the LCI One Control App or the

LCI One Control touchscreen, override switches at the command center

panel on the wall. If you were to turn on a device with the app or the touch

screen and then the touchscreen or the app were to fail for some reason;

you would not be able to turn off that device using the command center

panel switches.

To regain command center panel control, battery power would need to be

disconnected from the RV to reset the system. This can be done by turning

off the Battery Disconnect switch, or removing the power cable from your

battery, then re-attach the battery cable or turn the Battery Disconnect

switch back on, and the command center panel switches are now active

again.

NOTE:

Not all the following functions will necessarily be available on your

model RV. The following systems shown are a typical representation of

what you could see on your smart device or touchscreen. If specific items

are not displayed on your device they are not installed and may not be avail-

able for your RV.

Table of Contents

Maintenance Record

Summary of Contents for JAY FEATHER Towables 2021


















































































































































































Search results

Summary of Contents for JAY FEATHER Towables 2021

Reviews:

Related manuals for JAY FEATHER Towables 2021

Brands by name

Popular brands

Jayco JAY FEATHER Towables 2021, Owner'S Manual

Search results

Summary of Contents for JAY FEATHER Towables 2021

Reviews:

Related manuals for JAY FEATHER Towables 2021

Brands by name

Popular brands