AAA-055-00297 R2
5050 & 5100 OWNER MANUAL
P a g e
|
33
14.
CONTROLS
14.1 Weighing (All Models)
The scale system on all models includes four weigh-bars. The weigh-bars electronically measure the
amount of ration inside the mixing chamber.
When attaching the indicator to the machine, be sure that it is securely fastened.
On 5050 and 5100 models, the scale indicator is located on the upper mixer drum (near the operator).
The mounting bracket arm assembly allows the scale indicator to be turned to face every direction. Be
sure not to pinch the wire when adjusting the indicator position.
NOTE - Tighten swivel joint lock nut to the point where there is enough friction to hold the
indicator in position but it can still easily be turned by hand.
Figure 28 - Scale Mounting Bracket Arm Adjustment
1. Swivel Joint –
Used to adjust the direction of the scale indicator face.
2. Scale indicator
– Displays the weight of ration in the drum.
NOTE - The scale will be programmed to display weight in either kilograms (kg) or pounds (lbs.).
This is set by the manufacturer and must be ordered to suit. If your scale is not programmed to
your preferred units of measurement, or for any other settings, please see the user guide which
has been provided by the scale system manufacturer.
