background image

6                                                                                                                                                                                                                                          

www.javad.com

Connection

OEM board connection

The OEM board of TRE series connected directly to Evaluation Kit by its 

64-pin DIN41612 Euro connector.

Figure 1. 

TRE series OEM board connected to Evaluation Kit

The OEM board of TR/TRH-G2/TRH-G2P series connected to Evaluation 

Kit through Cross Adapter, as it shown on the picture below:

Figure 2. 

TR/TRH-G2/TRH-G2P series OEM board connected to 

Evaluation Kit

GNSS antenna connection

The OEM board may be connected to external GNSS antenna using TNC 

to MMCX RA Antenna cable #14-574101-03 (included in the Kit) and one 

of our external GNSS Antenna Cables (purchased separately):
- Accessory GPS Antenna Cable 3m (RG-58) #14-578107-01;
- Accessory GPS Antenna Cable 10m (RG-58) #14-578107-02.

Power connection

The OEM board powered through Evaluation Kit and Power Cable #14-

508021-01 (included in Kit). The Banana plugs of power cable may be 

connected to any available laboratory power supply, battery or oth-

er power source with power parameters, suitable for particular OEM 

board power specifications. 

Note: 

See particular OEM board specifications on www.javad.com.

CAUTION: 

Evaluation Kit does not provide any over-voltage protection. Connecting 

Evaluation Kit to voltage exceeding particular OEM board power voltage range may 

cause damage of OEM board and Evaluation Kit board.

CAUTION: 

Evaluation Kit provides reverse polarity protection only in voltages range, 

specified for particular OEM board.

In most cases, power supply with 12 VDC, 1 Amp stabilized output will 

be good enough for Evaluation Kit powering.

Serial RS-232 connection

A standard Null-Modem cable (not included in the Kit) with DE-9 Female 

connectors on both ends and with length from 1 to 10 meters may be 

used to connect PC COM_X port with Serial A, Serial B or Serial C port, 

D port on Evaluation Kit as well as to provide connection between two 

Evaluation Kits to send some data from one OEM receiver to another 

OEM receiver.
DE-9 Female connector external view and pinout is shown on the pic-

ture below.

Summary of Contents for TR-G2 Series













Reviews: