www.javad.com
11
Power Supply
Connect the supplied adapter to the side of the unit in the slot marked
“PWR”. Plug the two-prong end of the power cord to an AC100-240V
outlet. If you have difficulty inserting the plug, turn it over and reinsert
it. If the unit will not the used for a long time, disconnect the plug from
the outlet.
Note:
Before plugging the power cord into an AC outlet, make sure that
all the connections have been made.
CAUTION:
To reduce the risk of electric shock, do not perform any servicing other
than that contained in the operating instructions unless you are qualified to do so.
CAUTION:
To avoid the introduction of hazards when operating and installing, before
connecting of the equipment to the supply, make sure that the supply meets local
and national safety ordi- nances and matches the equipment’s voltage and current
requirements.
CAUTION:
Never attempt any maintenance or cleaning of the supply while plugged
in. Always remove supply from AC power before attempting service or cleaning.
CAUTION:
If the voltage supplied is below the minimum specification, the TRE/TR
Evaluation Kit will suspend operation. If the voltage supplied is above the maximum
specification, the TRE/TR Evaluation Kit may be permanently damaged, voiding your
warranty.
Make sure cords are located so that will not be stepped on, tripped over,
or otherwise subjected to damage or stress. Do not operate equipment
with a damaged cord or plug – replace immediately. To reduce the
risk of damage to the equipment, pull by the plug body rather than
the output cord when disconnecting the equipment. Do not operate
the supply if it has received a sharp blow, been dropped, or otherwise
damaged. Do not disassemble the supply.
CAUTION:
Before connecting the external power source and the TRE/TR Evaluation
Kit, make sure that the power source matches the TRE/TR Evaluation Kit’s voltage
and current requirements.
Usage Warnings
If this product has been dropped, altered, transported or shipped
without proper packaging, or otherwise treated without care, erro-
neous measurements may occur. Inform JAVAD GNSS immediately if
this product does not function properly. Only allow authorized JAVAD
GNSS warranty service centers to service or repair this product.
Note:
Do not connect or disconnect equipment with wet hands, you are
at risk of electric shock if you do!
Summary of Contents for TR-G2 Series
Page 2: ......
