background image

www.javad.com

  

25

Storage Precautions

Always clean the instrument after use. Wipe off 

dust with a cleaning brush, then wipe off dirt with a 

soft cloth.

Store in a location with a temperature of from -20° 

to +45°C, and no exposure to direct sunlight.

Use a clean cloth, moistened with a neutral deter-

gent or water, to clean the unit. Never use an abrasive 

cleaner, ether, thinner benzene, or other solvents.

Always make sure the instrument is completely dry 

before storing. Dry the unit with a soft, clean cloth.

General Warnings
JAVAD GNSS receivers are designed for measuring 

and measuring related uses (that is, measuring coor-

dinates, distances, angles and depths, and recording 

such measurements). This product should never be 

used:

Without the user thoroughly understanding opera-

tor’s manual.

After disabling safety systems or altering the prod-

uct.

With unauthorized accessories.
Without proper safeguards at the measuring site.
Contrary to applicable laws, rules, and regulations.
The Omega should never be used in dangerous en-

vironments. Use in rain or snow for a limited period is 

permitted.

Summary of Contents for OMEGA



























Reviews: