Javad Maxor, User Manual

Page: 111 / 142

www.javad.com Maxor User’s Manual 5-3
TR O U B L E S H O O T I N G
Receiver Problems
Receiver Problems
The following are some of the most commonly encountered receiver problems.
Problem
The receiver does not power up.
Causes Solutions
The receiver may be in
Zero Power Mode. Press the Reset key.
If no external power
source used, batteries
may be discharged. Connect a fully charged external power source and retry.
See “Powering the Maxor” on page 2-2.
The receiver has an
external power source,
but internal batteries
are discharged. Charge the batteries overnight. See“Powering the Maxor”
on page 2-2.
The receiver may have
a defective charger or
defective internal
batteries. If after charging your internal batteries overnight, and your
Maxor is not powering, contact JNS Customer Support for
advice.
Problem
The receiver cannot establish a connection to a computer or external controller.
Causes Solutions
The Daisy Chain mode
is still active. See Step 20. on page 2-28 for the procedure to turn off the
Daisy Chain.
The cable is not
properly plugged in.
• Check that the cable connector is attached to the correct
serial port.
• Unplug the cable, then securely and properly reconnect
it to the receiver.
• See “External Components” on page 1-11 and
“Connector Specifications” on page B-9 for information
on the receiver's connectors.