manualshive.com logo in svg

Javad HPT402, Operator'S Manual, Page: 32 / 54

Share
Download
Javad HPT402 Operator'S Manual Download Page 32

Command Line Interface

Special Commands
HELP

32

 

                                                                                                                   www.javad.com

3.4.2. HELP

The HELP command types the list of all available commands:

HELP – Display this usage

BOOT – Reboot the unit

LINK – RF Link Operation Mode

DPORT– Data Port Configuration

MPORT – Maintenance Port Configuration

ALARM – Alarm Indication and Alarm Control Configuration

SLEEP – Sleep Mode Configuration

CONNECT – Connect to Specified Unit

STATE – Display Status and Statistics

SAVE– Save Current Configuration into Configuration File

INFO – Display Product ID along with Hardware/Software Versions

DATAMODE – Exit Maintenance Mode

[COMMAND] /? – Display Command Usage

3.4.3. SAVE

The SAVE command is intended to store the unit’s currently used configuration into the User
Configuration file. The configuration stored in the User Configuration file is activated by
automatically after unit’s reboot.

Summary of Contents for HPT402























































Reviews:

No comments