Configuration
TriPad Configuration
How to Work with DELTAD-G2/G2D
45
www.javad.com
• Data recording auto-start on page 47.
Figure 3-16. Receiver Configuration – MinPad tab
Recording Interval parameter
This parameter specifies the message output interval into the log file when the TriPad FN button
(pressed for1-5 seconds) activates data logging. This setting is used not only when logging a
single log file, but also when logging receiver data in AFRM mode. Values are 1-86400 seconds.
The default value is one second.
Elevation Mask for Log File parameter
This parameter specifies the minimum elevation angle for the satellites whose data will be put in
the receiver files logged when pressing FN.
The default value is five degrees.
File Name Prefix parameter
This parameter specifies what prefix will be added to the names of the receiver files created when
pressing FN. The prefix can be up to 20 characters long.
The default value is log.
Log file names have the following structure:
<prefix><month><day><sequential alphabet letter>
