Configuration
Configuring the Receiver
32
www.javad.com
4. In the General tab click Set all parameters to defaults and set up the antenna parameter:
Auto, Internal or External, when external antenna is used.(Figure 3-2).
Figure 3-2. Set all parameters to defaults
5. Click the MinPad tab and configure the following settings (Table 3-1), then click Apply
(Figure 3-3 on page 33).
Table 3-1. Receiver Parameters for the MinPad Tab
Parameter
Base Receiver
Rover Receiver
Recording interval
Enter 15 seconds.
Elevation mask angle
Enter 15 degrees.
File name prefix
Enter a unique ID, such as the last 3 digits of receiver’s serial number.
