Introduction
Getting Acquainted
Cables
21
www.javad.com
• Ethernet - used to connect the receiver to local network. The body of the connector on the
corresponding cable is gray.
• USB –used for high-speed data transfer and communication between the receiver and an
external device. The body of the connector on the corresponding cable is black.
Connectors
The DELTA receiver can be equipped according users need and have different connectors on the
back panel. Below are presented some examples of possible configurations:
• The external GNSS antenna connects to the TNC external antenna connector (optional)
• The 1PPS and Event marker TNS connectors (up to two) (optional)
• External Frequency Input/Output TNC connector (optional)
1.2.2. Cables
The DELTA receiver package includes standard communication and power cables for configuring
the receiver and providing a power source to the receiver.
Receiver-to-computer RS232 serial cable – connects
the receiver’s serial port and an external device
(hand-held controller or computer)
p/n 14-578103-01
Receiver-to-SAE power cable – connects the
receiver’s power port and the power supply’s SAE
connector or the extension cable’s SAE connector
p/n 14-578101-01
SAE-to-SAE cable extension – connects SAE
connectors over longer distances
p/n 14-578102-01
GNSS Antenna
Connector
GNSS Antenna
Connector
Connector
GNSS Antenna
1PPS B
1PPS A
Frequency I/O
1PPS A
Frequency I/O