AT-564
[RE5F22A]
DTC P0770 SHIFT SOLENOID VALVE E
Revision: November 2006
2006 Altima
TCM terminal and data are reference value. Measured between each terminal and ground.
Diagnostic Procedure
ECS009H6
1.
CHECK SHIFT SOLENOID VALVE E SIGNAL
With CONSULT-II
1.
Start engine.
2.
Select “A/T” with “DATA MONITOR” mode in CONSULT-II.
3.
Drive vehicle and read out the value of “SFT SOL E OUT” and
“SFT SOL E MON”.
Without CONSULT-II
1.
Drive vehicle.
2.
Check voltage between TCM connector terminal and ground.
OK or NG
OK >> GO
TO
7.
NG
>> GO TO 2.
2.
CHECK SHIFT SOLENOID VALVE E CIRCUIT
1.
Turn ignition switch “OFF”.
2.
Disconnect the TCM connector.
3.
Check resistance between TCM connector terminal 47 and
ground.
OK or NG
OK
>> GO TO 7.
NG
>> GO TO 3.
Terminal
Wire
color
Item
Condition
Data (Approx.)
47
BR/Y
Shift solenoid
valve E
When shift solenoid valve E operates.
(When driving in reverse gear.)
Battery voltage
When shift solenoid valve E does not operate.
0V
Monitor item
Condition
Indication
●
SFT SOL E OUT
●
SFT SOL E MON
When shift solenoid valve E operates.
(When driving in reverse gear.)
ON
When shift solenoid valve E does not operate.
OFF
SCIA2895E
Connector
Terminal
Condition
Voltage
(Approx.)
F57
47 - Ground
When shift solenoid valve E
operates.
(When driving in reverse gear.)
Battery
voltage
When shift solenoid valve E
does not operate.
0V
SCIA2896E
Connector
Terminal
Condition
Resistance
(Approx.)
F57
47 - Ground
Temperature: 20
°
C (68
°
F)
11 - 16
Ω
SCIA2897E
