AT-270
[RE4F04B]
ON-VEHICLE SERVICE
Revision: November 2006
2006 Altima
Control Cable Adjustment
ECS009AQ
Move selector lever from the P position to the 1 position. You should
be able to feel the detent in each position. If the detent cannot be felt
or the pointer indicating the position is improperly aligned, the control
cable needs adjustment.
1.
Place selector lever in the P position.
CAUTION:
Turn wheels more than 1/4 turn and apply the parking brake.
2.
Loosen control cable lock nut.
3.
Secure the manual lever.
4.
Push control cable in the direction of the arrow shown using
specified force.
5.
Tighten control cable lock nut.
6.
Move selector lever from P to 1 position. Make sure that selector lever moves smoothly.
●
Make sure that the starter operates when the selector lever is placed in the N or P position.
●
Make sure that the transaxle is locked properly when the selector lever is placed in the P posi-
tion.
Differential Side Oil Seal Replacement
ECS009AR
1.
Remove drive shaft assembly. Refer to
.
2.
Remove oil seals using Tool
CAUTION:
Do not reuse oil seals.
3.
Install new oil seals.
CAUTION:
●
Do not reuse oil seals.
●
Apply ATF to new oil seals.
●
Install new oil seals so dimension A is within specification
Specified force
: 9.8 N (1.0 kg, 2.2 lb)
SCIA3157E
Tool number
: KV381054S0 (J-34286)
SCIA5377E
SAT782
Dimension A
:
−
0.5 mm (
−
0.02 in) to 0.5 mm (0.02 in)
AAT531A