TROUBLE DIAGNOSIS - BASIC INSPECTION
AT-73
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
3.
Insert the extension adapter hose of a can of Transmission
Cooler Cleaner (Nissan P/N 999MP-AM006) into the cooler out-
let hose.
CAUTION:
●
Wear safety glasses and rubber gloves when spraying
the Transmission Cooler Cleaner.
●
Spray cooler cleaner only with adequate ventilation.
●
Avoid contact with eyes and skin.
●
Do not breath vapors or spray mist.
4.
Hold the hose and can as high as possible and spray Transmis-
sion Cooler Cleaner in a continuous stream into the cooler outlet
hose until fluid flows out of the cooler inlet hose for 5 seconds.
5.
Tie a common white, basket-type coffee filter to the end of the
cooler inlet hose.
6.
Insert the tip of an air gun into the end of the cooler outlet hose.
7.
Wrap a shop rag around the air gun tip and end of cooler outlet
hose.
8.
Blow compressed air regulated to 5 - 9 kg/cm
2
(70 - 130 psi)
through the cooler outlet hose to force any remaining A/T fluid
into the coffee filter.
9.
Remove the coffee filter from the end of the cooler inlet hose.
10. Perform
AT-73, "A/T FLUID COOLER INSPECTION PROCE-
A/T FLUID COOLER INSPECTION PROCEDURE
1.
Inspect the coffee filter for debris.
a.
If small metal debris less than 1mm (0.040 in) in size or metal
powder is found in the coffee filter, this is normal. If normal
debris is found, the A/T fluid cooler/radiator can be re-used and
the procedure is ended.
SCIA2955E
SCIA2965E
SCIA2966E
SCIA2967E