REPAIR FOR COMPONENT PARTS
AT-673
[RE5F22A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
13. Remove O-rings from B5 brake piston.
CAUTION:
Do not reuse O-rings.
14. Remove seal ring from transaxle case cover.
CAUTION:
Do not reuse seal ring.
INSPECTION
●
Check that the sliding surface of disc and plate is not worn or burnt. If the disc or plate is worn or burnt,
replace it
CAUTION:
Soak new clutch discs for at least 2 hours in ATF.
ASSEMBLY
1.
Install new seal ring in transaxle case cover.
CAUTION:
●
Do not reuse seal ring.
●
Apply ATF to new seal ring.
2.
Install new O-rings in B5 brake piston.
CAUTION:
●
Do not reuse O-rings.
●
Apply ATF to new O-rings.
3.
Coat the inner surface of transaxle case cover with ATF.
4.
Press B5 brake piston into the transaxle case cover.
5.
Place return spring on B5 brake piston.
6.
Compress return spring with a press using Tool.
CAUTION:
Do not press return spring too much to avoid deformation.
7.
Install snap ring using suitable tool.
SCIA4249E
SCIA4249E
SCIA4247E
Tool number
: KV31102400 (J-34285 and J-34285-87)
SCIA5365E
