Jatco RE4F04B, Manual, Page: 531 / 708

DTC P0744 A/T TCC S/V FUNCTION (LOCK-UP)
AT-531
[RE5F22A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006 2006 Altima
TCM terminals and data are reference value. Measured between each terminal and ground.
Diagnostic Procedure
ECS009FU
1.
CHECK SHIFT SOLENOID VALVE D CIRCUIT
Perform “Diagnostic Procedure” for DTC P0765. Refer to AT-559, "Diagnostic Procedure" .
OK or NG
OK >> GO TO 2.
NG >> Repair or replace damaged parts.
2.
CHECK PRESSURE CONTROL SOLENOID VALVE C CIRCUIT
Perform “Diagnostic Procedure” for DTC P0795. Refer to AT-578, "Diagnostic Procedure" .
OK or NG
OK >> GO TO 3.
NG >> Repair or replace damaged parts.
3.
CHECK MALFUNCTIONING ITEM
1. Control valve assembly. Refer to AT-629, "Control Valve Assembly" .
2. Disassembly A/T. Refer to AT-643, "DISASSEMBLY" .
3. Check the following item:
–
Torque converter clutch. Refer to AT-643, "DISASSEMBLY" .
OK or NG
OK >> GO TO 4.
NG >> Repair or replace damaged parts.
4.
CHECK DTC
Perform “DTC Confirmation Procedure”. Refer to AT-529, "DTC Confirmation Procedure" .
OK or NG
OK >> INSPECTION END
NG >> Replace the control valve assembly. Refer to AT-629, "Control Valve Assembly" .
Terminal
Wire
color
Item Condition Data (Approx.)
28 W
Pressure control
solenoid valve C
ground
When engine is running with idle speed and set-
ting selector lever to “P” position.
0V
45 OR
Pressure control
solenoid valve C When engine is running with idle speed and set-
ting selector lever to “P” position.
300Hz