Jatco RE4F04B, Manual, Page: 487 / 708

DTC P0710 A/T FLUID TEMPERATURE SENSOR CIRCUIT
AT-487
[RE5F22A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006 2006 Altima
5.
CHECK A/T FLUID TEMPERATURE SENSOR
1. Remove side cover. Refer to AT-629, "Side cover" .
2. Disconnect A/T fluid temperature sensor.
3. Check resistance between terminals 4 and 8.
OK or NG
OK >> GO TO 6.
NG >> Repair or replace terminal cord assembly. Refer to AT-
629, "Terminal Cord Assembly" .
6.
CHECK DTC
Perform “DTC Confirmation Procedure”. Refer to AT-483, "DTC Confirmation Procedure" .
OK or NG
OK >> INSPECTION END
NG >> GO TO 7.
7.
CHECK TCM
1. Check TCM input/output signal. Refer to AT-459, "TCM Input/Output Signal Reference Values" .
2. If NG, recheck TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.
Component Inspection
ECS009E4
A/T FLUID TEMPERATURE SENSOR
1. Remove side cover. Refer to AT-629, "Side cover" .
2. Disconnect A/T fluid temperature sensor.
3. Check resistance between terminals 4 and 8.
4. If NG, repair and replace terminal cord assembly. Refer to AT-
629, "Terminal Cord Assembly" .
Connector Terminal Temperature Resistance
F30 4 - 8
10
°
C (50
°
F) 5.80 - 7.09k
Ω
110
°
C (230
°
F) 0.23 - 0.26k
Ω
WCIA0448E
Connector Terminal Temperature Resistance
F30 4 - 8
10
°
C (50
°
F) 5.80 - 7.09k
Ω
110
°
C (230
°
F) 0.23 - 0.26k
Ω
WCIA0448E