AT-486
[RE5F22A]
DTC P0710 A/T FLUID TEMPERATURE SENSOR CIRCUIT
Revision: November 2006
2006 Altima
2.
CHECK FLUID TEMPERATURE SENSOR CIRCUIT
1.
Turn ignition switch “OFF”.
2.
Disconnect the TCM connector.
3.
Check resistance between terminals 41 and 42.
4.
Check if there is continuity between the connector terminal and
ground.
OK or NG
OK
>> GO TO 6.
NG
>> GO TO 3.
3.
CHECK TERMINAL CORD ASSEMBLY WITH A/T FLUID TEMPERATURE SENSOR
1.
Turn ignition switch “OFF”.
2.
Disconnect terminal cord assembly harness connector.
3.
Check resistance between terminals 4 and 8.
OK or NG
OK
>> GO TO 4.
NG
>> GO TO 5.
4.
CHECK HARNESS BETWEEN TCM AND TERMINAL CORD ASSEMBLY
Check the following.
●
Open or short-circuit in the harness between TCM and terminal cord assembly.
OK or NG
OK
>> GO TO 6.
NG
>> Repair or replace damaged parts.
Connector
Terminal
Temperature
Resistance
(Approx.)
F57
41 - 42 (ground)
0
°
C (32
°
F)
9.8 k
Ω
20
°
C (68
°
F)
4.2 k
Ω
80
°
C (176
°
F)
0.54 k
Ω
100
°
C (212
°
F)
0.31 k
Ω
SCIA2872E
Connector
Terminal
Temperature
Resistance (Approx.)
F30
4 - 8
0
°
C (32
°
F)
9.8 k
Ω
20
°
C (68
°
F)
4.2 k
Ω
80
°
C (176
°
F)
0.54 k
Ω
100
°
C (212
°
F)
0.31 k
Ω
SCIA2873E
