AT-362
[RE4F04B]
ASSEMBLY
Revision: November 2006
2006 Altima
4.
Measure dimensions “
1
” and “
2
” at side cover and then cal-
culate dimension “A” using straightedge and depth gauge.
●
Measure dimension “
1
” and “
2
” in at least two places.
5.
Measure dimensions “
2
” and “
3
” and then calculate dimen-
sion “B” using straightedge and depth gauge.
●
Measure “
2
” and “
3
” in at least two places.
6.
Select proper thickness of adjusting shim so that output shaft
end play (clearance between side cover and output shaft bear-
ing) is within specifications.
7.
Install adjusting shim on output shaft bearing.
Assembly (2)
ECS009BG
1.
Apply anaerobic liquid gasket to transaxle case as shown. Refer
to
GI-45, "Recommended Chemical Products and Sealants"
.
“A”
: Distance between tran-
saxle case fitting surface
and adjusting shim mat-
ing surface.
A =
1
−
2
2
: Height of gauge
SAT374F
“B”
: Distance between the
end of output shaft bear-
ing outer race and the
side cover fitting surface
of transaxle case.
B =
2
−
3
2
: Height of gauge
Output shaft end play
(A
−
B)
: 0 - 0.15 mm (0 - 0.0059 in)
Output shaft end play
adjusting shims
: Refer to
.
SAT375F
SAT440D
SAT441D
