Jatco RE4F04B, Manual, Page: 219 / 708

TROUBLE DIAGNOSIS FOR SYMPTOMS
AT-219
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006 2006 Altima
2. Engine Cannot Be Started In P and N Position
ECS0099V
SYMPTOM:
●
Engine cannot be started with selector lever in P or N position.
●
Engine can be started with selector lever in D, 2, 1 or R position.
1.
CHECK PARK/NEUTRAL POSITION (PNP) SWITCH CIRCUIT
With CONSULT-II
Does “TCM INPUT SIGNALS” in “DATA MONITOR” show damage to park/neutral position (PNP) switch cir-
cuit?
Without CONSULT-II
Does self-diagnosis show damage to park/neutral position (PNP)
switch circuit?
Yes or No
Yes >> Check park/neutral position (PNP) switch circuit. Refer
to AT-110, "DTC P0705 PARK/NEUTRAL POSITION
SWITCH" .
No >> GO TO 2.
2.
CHECK PARK/NEUTRAL POSITION (PNP) SWITCH
Check for short or open of park/neutral position (PNP) switch harness connector terminals 1 and 2. Refer to
SC-14, "DIAGNOSTIC PROCEDURE 2" .
OK or NG
OK >> GO TO 3.
NG >> Repair or replace park/neutral position (PNP) switch.
3.
CHECK STARTING SYSTEM
Check starting system. Refer to SC-11, "WORK FLOW" .
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.
WCIA0059E