Jatco RE4F04B, Manual

Page: 183 / 708

DTC P1705 THROTTLE POSITION SENSOR [ACCELERATOR PEDAL POSI-
TION (APP) SENSOR]
AT-183
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006 2006 Altima
Diagnostic Procedure
ECS0098T
1.
CHECK CAN COMMUNICATIN LINE
Perform the self-diagnosis check. Refer to AT-49, "SELF-DIAGNOSTIC RESULT TEST MODE" , AT-59,
"Diagnostic Procedure Without CONSULT-II" .
Is any malfunction of the "U1000 CAN COMM CIRCUIT" indicated?
YES >> Check the CAN communication line. Refer to AT-190, "DTC U1000 CAN COMMUNICATION
LINE" .
NO >> GO TO 2.
2.
CHECK INPUT SIGNAL
With CONSULT-II
1. Turn ignition switch to ON position.
(Do not start engine.)
2. Select “TCM INPUT SIGNALS” in “DATA MONITOR” mode for “A/T” with CONSULT-II.
3. Read out the value of "THROTTLE POSI".
OK or NG
OK >> GO TO 4.
NG >> GO TO 3.
3.
CHECK DTC WITH ECM
With CONSULT-II
1. Turn ignition switch to ON position. (Do not start engine.)
2. Select "SELF-DIAG RESULTS" mode for "Engine" with CON-
SULT-II. Refer to
EC-121, "SELF-DIAG RESULTS MODE" .
OK or NG
OK >> GO TO 4.
NG >> Check the DTC detected item. GO TO EC-121, "SELF-
DIAG RESULTS MODE" .
4.
CHECK DTC
Perform "DTC Confirmation Procedure". Refer to AT-182, "Diagnostic Trouble Code (DTC) Confirmation Pro-
cedure" .
OK or NG
OK >> INSPECTION END
NG >> GO TO 5.
Item name Condition
Display value
(Approx.)
THROTTLE POSI
Release accelerator pedal 0.0/8
Fully depressed accelerator pedal 8.0/8
SCIA3251E
BCIA0030E