DTC P0720 VEHICLE SPEED SENSOR·A/T (REVOLUTION SENSOR)
AT-123
[RE4F04B]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006
2006 Altima
2.
Drive vehicle and check for an increase of “VHCL/S SE·MTR” value.
If the check result is NG, go to
AT-125, "Diagnostic Procedure"
If the check result is OK, go to following step.
3.
Select “DATA MONITOR” mode for A/T” with CONSULT-II.
4.
Start engine and maintain the following conditions for at least 5 consecutive seconds.
VHCL SPEED SE: 30 km/h (19 MPH) or more
THRTL POS SEN: More than 1.2V
Selector lever: D position
Driving location: Driving the vehicle uphill (increased engine load) will help maintain the driving
conditions required for this test.
If the check result is NG, go to
AT-125, "Diagnostic Procedure"
If the check result is OK, go to following step.
5.
Maintain the following conditions for at least 5 consecutive seconds.
CMPS·RPM (REF): 3,500 rpm or more
THRTL POS SEN: More than 1.2V
Selector lever: D position
Driving location: Driving the vehicle uphill (increased engine load) will help maintain the driving
conditions required for this test.
WITH GST
Follow the procedure “With CONSULT-II”.
BCIA0030E
BCIA0031E
