Page 5
2. Product Overview
3.5L water cooler adopts vertical duct, 18 waterway condenser and high-quality
heat-resistant water pump. Featuring high lift, small caliber and large flow, it meets the
cooling requirements of welding equipment.
3. Performance Features
This product features small volume and light weight. Featuring low noise and stable flow, this
product can meet the cooling requirements for MIG/TIG precision welding equipment. This
product has good cooling effect and is energy-saving, environmental and pollution-free.
4.Technical Parameters
Note: Some parameters are acquired under experimental conditions.
Technical Parameters
Units
LC-30 COS1
Rated input voltage
V
Single-phase AC115-230V±15% 50Hz
Rated input power
W
AC115@92w
AC230@115W
Volume of water tank
L
3.5
Maximum pressure
MPa
0.48
Maximum flow rate
L/min
4
Rated cooling power
KW
0.52 (1L/min)
Protection class
IP23S
Executive standard
EN IEC 60974-2/BS EN IEC60974-2
Coolant
Pure water, anti-freezing solution, mixed liquid
Operating ambient
temperature
℃
Mixed liquid, pure water: 5-60
Anti-freezing solution: -20-60
Storage temperature
℃
-20-60
Noise
db
＜
70
Machine dimensions
mm
527*182*224
Packaging dimension
mm
630*255*315
Weight
kg
-
