Green Power CD-1 CD Player
Operating Instructions
Congratulations on your purchase of JAS Green Power CD-1 CD Player. Please read this manually thoroughly. It will explain in detail
the features and operation of your JAS CD Player and help to ensure a trouble free installation. Unpack the player carefully. It is
recommended that you save the carton and packing material for future use, should you need to move your player or return it for
service. Your JAS CD player is designed to work in a horizontal position. It is important to allow at least 5 cm of space behind the unit
for adequate ventilation. To avoid damage, never place it near radiators, in front of heating vents, in direct sunlight or in an
excessively humid or dusty location.
SAFETY INFORMATION
This CD player is designed to operate on 220-240 Volts 50 Hz AC or 110-120 Volts 60 Hz AC. The equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in residential installations.
TO ACHIEVE MAXIMUM PERFORMANCE FROM YOUR CD PLAYER
Install the equipment in a location which is relatively free of moisture and dust, and is well ventilated. The equipment may not be able
to perform at its best in an extremely cold or hot environment. Do not attempt to use below 41oF/5oC or above 95oF/35oC.
MORE TIPS ON “DOs” AND “DON’Ts”
Always handle discs with clean hands.
Avoid using scratched discs.
Do not attempt to clean the CD player or discs with chemical solvents, as this may cause irreparable damage. Use a clean, dry cloth,
or specially designed cleaning materials for discs.
If the CD player malfunctions, do not open the unit and attempt to repair it yourself. This is a highly technical product and requires
specialist service - return it to your dealer.
Use batteries (2 x AAA) of the same type in the remote control handset. The use of odd or different type cells will affect its
performance. Batteries are supplied with the remote.
Keep this manual in a safe place for reference.
POWER
–
The mains On/Off switch is located on the front panel. Press POWER button to turn the player on or off. It should be
noted that the power button on the remote handset will not turn the player on or off.
FRONT PANEL CONTROLS
–
In addition to the power on/off button, there are five control buttons on the right hand side of
front panel. These controls operate in the following manner.
＞∥
Play
/
Pause –
Press to play. Press to pause (while playing)
■
Stop –
Press to stop the disc playing
∣＜＜
Skip backward –
Press to skip back.
＞＞
︳
Skip forward –
Press to skip tracks.
DIM Dimmer
–
Three levels of brightness can be selected by pressing the button. This button can also turns off LCD display.
Apart from pressing the STOP button for halting disc playing, transport in motion will also stop automatically when the manually
operated sliding acrylic cover is opened.
REMOTE CONTROL RC-2 –
Except DIM, RC-2 performs all the functions as given in the paragraph detailing front panel
controls above. The following controls can be performed via RC-2.
＜＜
Scan backward –
Press to scan back on the track which is playing.
＞＞
Scan forward –
Press to scan forward on the track which is playing.
TIME
Time elapsed –
Press to show time elapsed in playing the entire disc, the track being played, and remaining time of
track playing in sequence.
REPEAT Repeat functions –
Press to set the player to play all tracks of the disc, the track being selected, and to turn off the
function.
Press the REPEAT button once and the letter “r” will appear in the display. The entire disc will be repeated.
Press the REPEAT button a second time and the letter “r” will appear in the display. Select the desired track and the
track number will appear on the display. Press the PLAY button. The track will be repeated.
