Janus GN-100, User Manual

Page: 29 / 43

29
o. Folder in the SD card

Only after powering off, please remove the SD card.

Please insert the SD card in PC.

Please select the removable disk in the explorer menu.

Folders in the removable disk are displayed like the left picture.

“event” folder can be created if over 10% is set as the proportion of
the event data saving.

Config(System management folder)
-
Log.txt: The operating status of the device is to be saved in the log
file.
-
Version.ini: Saving the version information of the device

Data(Normal data folder)
-
Recorded data is to be saved. According to SD card capacity, the
number of JDR files is different and create the folders in advance to
make the space.

Event(Event folder)
-
Event(IMPACT, PARKING, MOTION) data are to be saved.

Update(firmware update folder)
-
If the latest firmware is to be saved in the update folder, upgrading
the firmware would be automatically proceeding.

viewer.exe
-
PC viewer installation file copied from the unit. This is a factory
version of viewer stored in NAND flash memory, may require
update viewer from PC while you are using.
Caution
-
Freely deleting and formatting files in a Micro SD card are strictly prohibited.
-
Please back up the important recorded data in the PC.
-
Average recording time per a Micro SD card capacity
(8GB : 3.5 hours,16GB: 7 hours, 32GB: 14 hours, 64GB : 28 hours based on 720P/25FPS settings)