Jansen Medicars Mobile Power System, User Manual

Page: 4 / 16

Jansen Medicars
Version feb. 2012 – V1.0
Page 2
1 Introduction
The Mobile Power System is a system that provides 230VAC power from a
battery pack. This system is designed for mobile medical electrical
equipement. In certain situations this system can be used as an UPS.
Before the Mobile Power System can be used for the first time, it has to be
charged for at least 16 hours. See also Chapter 3.
1.1 Bookmark
Important! Read these directions for use in their entirety before you use this
system. Take the directions for safety (chapter 2) especially into
consideration. Do not work on the system if you do not possess the
necessary knowledge, or if you are not authorised to do so.
Jansen Medicars cannot be held responsible for damage, consequential
damages and injuries caused by incorrect use/treatment or by negligent
maintenance.