31
SEWING MACHINE
MODEL DC5100
THREADER PLATE
WHEN THE HOOK OF THE THREADER PLATE IS DAMAGED, CHANGE OR ADJUST THE
PART AS FOLLOWS.
TO CHANGE THE THREADER PLATE:
1. RAISE THE NEEDLE TO ITS HIGHEST POSITION AND LOWER THE THREADER KNOB TO ITS
LOWEST POSITION.
2. LOOSEN THE SCREW AND REMOVE THE THREADER PLATE (FIG. A).
TO CHANGE THE NEEDLE THREADER:
1. IF THE HOOK OF THE THREADER PLATE TOUCHES LEFT OR RIGHT SIDE OF THE NEEDLE EYE,
LOOSEN THE SCREW AND ADJUST THE HOOK POSITION (FIG. B).
2. IF THE HOOK OF THE THREADER PLATE TOUCHES THE TOP OR BOTTOM SIDE OF THE NEEDLE
EYE, LOOSEN THE SCREW AND ADJUST THE HOOK POSITION (FIG. C).
THREADER KNOB
HOOK
THREADER PLATE
SCREW
POSITION SETTING
PLATE
THREADER PLATE
TO CHANGE THE THREADER PLATE (FIG. A)
ADJUST THE DIRECTION OF LEFT OR RIGHT
(FIG. C)
ADJUST THE DIRECTION OF LEFT OR RIGHT
(FIG. B)
PART REMOVAL AND REPLACEMENT (2)
