25
X
REPLACEMENT AND ADJUSTMENT OF NEEDLE THREADER PLATE
IF THE NEEDLE THREADER IS DAMAGED, REPLACE IT OR ADJUST AS FOLLOWS TO REPLACE THE
NEEDLE THREADER COVER:
1. PULL OUT THE THREADER COVER (DRAWING. 1).
2. TO ATTACH THE THREADER COVER, MATCH THE GROOVE TO THE PIN (B) AND INSERT THE
THREADER COVER (C).
ADJUSTMENT OF THREADER PLATE:
3. IF THE FOOK (D) IS TOUCHING THE RIGHT OR LEFT SIDE OF NEEDLE EYE, LOOSEN THE
SETSCREW (E) AND SLIDE THE THREADER PLATE (H). (SEE DRAWING2)
4. IF THE HOOK (D) IS TOUCHING THE TOP OR BOTTOM SIDE OF NEEDLE EYE, REMMOVE THE
FACE COVER AND LOOSEN THE SETSCREW (F) AND ADJUST THE THREADER POSITION SET
PLATE (G).
MECHANICAL ADJUSTMENT
THREADER KNOB
HOOK (D)
THREADER POSITION SET PLATE (G)
SETSCREW (F)
THREADER PLATE (H)
VIEW X
HOOK (D)
S E T S C R E W
(E)
DRAWING 1
PIN (B)
DRAWING 2
THREADER COVER (C)
