janitza UMG 512-Pro, User Manual And Technical Data

Page: 86 / 120

UMG 512-PRO www.janitza.com
86
12.13 Digital inputs/outputs
Your device has two digital outputs and two digital
inputs.
11 12 13
24V
DC
K1 K2
=
-
+
=
+
-
S1 S2
Digital Outputs
14 15 16
Digital Inputs
Fig.: Digital outputs and inputs
The inputs and outputs can be configured using
the GridVis® software included in the scope of
delivery.
12.13.1 Digital inputs
The digital inputs provide the option of sending
information from other devices that have a digital
output directly to your device.
The Inputs area in the configuration window of
the GridVis® software can be used to define the
following
for both digital inputs:
·Which value type the incoming signal has.
·Which scaling factor should be used for the
value.
Fig. Configuring inputs of the UMG 512-PRO via Grid-
Vis®.
12.13.2 Pulse output
The digital outputs can also be used to output
pulses for counting energy consumption. To do
so, a pulse is applied to the output after a certain,
configurable amount of energy of a defined dura-
tion has been reached.
To use a digital output as a pulse output requires
that various settings be made in the configuration
menu using the GridVis® software:
·Pulse width
·Digital output to be configured,
·Output type (event message or S0 output)
·The measured value to be transmitted
·Pulse valency
Fig. Configuring digital outputs of the UMG 512-PRO
via GridVis®.