JPC 100-PRO
10
3.
Product description
3. 1
Scope of performance
This device is part of a customer-specific
complete solution. It serves as a user inter-
face and operator interface for the measure-
ment devices used.
The device is intended for:
• Visualization of current and voltage mea-
suring devices in bus systems.
• Measured value monitoring and configu-
ration of connected Janitza measurement
devices.
For more information on the complete solu-
tion, please refer to the corresponding usage
information.
3. 2
Incoming goods inspection
Safe and trouble-free operation of this device
presupposes proper transport, storage, set-
up and assembly as well as operation and
maintenance in addition to compliance with
the safety information and warning notices.
Exercise due caution when unpacking and
packing the device, do not use force and only
use suitable tools.
Before installing the device check the follow-
ing:
• Its flawless mechanical condition by visual
inspection.
• The scope of delivery for completeness.
If it can be assumed that safe operation is no
longer possible:
• Disconnect the device from operation
immediately!
• Secure the device against being switched
on again!
It can be assumed that safe operation is no
longer possible if the device, for example
• Has visible damage.
• No longer functions despite an intact pow-
er supply.
• Was subjected to extended periods of
unfavorable conditions (e.g. storage out-
side of the permissible climate conditions
without adaptation to the room climate,
condensation, etc.) or transport stress
(e.g. falling from an elevated position, even
without visible external damage, etc.).
3. 3
Intended use
The device is:
• Intended for installation in switchboard
cabinets.
• Not intended for installation in vehicles!
Use of the device in non-stationary equip-
ment constitutes an exceptional environ-
mental condition and is only permissible
by special agreement.
• Not intended for installation in environ-
ments with harmful oils, acids, gases,
vapors, dusts, radiation, etc.
Safe and trouble-free operation of the device
requires proper transport, storage, assembly,
installation, operation and maintenance.