47
www.janitza.de
800-CT8-LP module
General
Net weight (with plug-in terminals)
73 g (0.16 lb)
Device dimensions
W = 18 mm (w = 0.71 in), H = 90 mm (h = 3.54 in),
D = 76 mm (d = 2.99 in)
Mounting orientation
As desired
Fastening/mounting -
Suitable DIN rails - (35 mm / 1.38 in)
· TS 35/7.5 according to EN 60715
· TS 35/10
· TS 35/15 x 1.5
Protection against foreign matter and water
IP20 according to EN60529
Impact resistance
IK07 according to IEC 62262
Environmental conditions during operation
The device:
·Is for weather-protected and stationary use.
·Fulfills operating conditions according to DIN IEC 60721-3-3.
·Has protection class II according to IEC 60536 (VDE 0106, part 1), a ground wire connection is not required!
Working temperature
-10 °C (14 °F) to +55 °C (131 °F)
Relative humidity
5 to 95% at 25 °C (77 °F), no condensation
Pollution degree
2
Ventilation
No forced ventilation required
Supply voltage
Via the UMG 801 basic device
Transport and storage
The following specifications apply for devices transported and stored in the original packaging.
Free fall
1 m (39.37 in)
Temperature
K55: -25 °C (-13 °F) to +70 °C (158 °F)
Relative humidity
0 to 95% at 25 °C (77 °F), no condensation
13. Technical data
Current measurement
Measurement via low-power current transformers with a secondary
voltage of
0 - 400 mV
Channels
8 (2x4)
· 2 systems - L1, L2, L3, N
· Single channels
Input impedance per channel
230 kΩ
Nominal input signal of the module
0 .. 400 mV
Crest factor
1.8
Overload for 1 s
1 V
Resolution
16 bit
Sampling frequency
6.8 kHz
Frequency of the
fundamental oscillation
40 Hz .. 70 Hz
Harmonics
1 ... 15 (odd only)
13.1 Technical specifications
