Getting
started
Setting
up
the
console
2.
Getting
started
Setting
up
the
console
Power
Connect the Stage CL’s external power supply unit to any mains supply between
100 and 240vAC. Connect the power supply’s 12v DC connector to the Stage CL
and pass the cable through the strain relief moulding.
DMX
Output
The Stage CL can output one Universe (512 channels) from its DMX output. Use a
5 pin DMX cable to connect the console to your lights.
Ethernet
The Stage CL supports Art-net broadcasting via the Ethernet (RJ45) connector.
To turn Artnet On or Off see Setup on page 11-1
USB
You can connect a USB memory stick to the console to save copies of your show
files.
Switching
on
When you switch the console power on the Stage CL starts up and displays the
opening splash screen.
Stage
CL
User
Guide,
Version
0.4
2
‐
1
