Quickstart
Switching
on
3.
Quickstart
Once you’ve got your Stage CL system connected and powered up you can patch
up to 12 fixtures (or groups of fixtures).
Even if you decide to get started without reading the rest of the manual please
take some time to familiarise yourself with the front panel controls and shortcuts:
Icon
This control…
does this…
Home
Tap to go to the Home screen
Double tap to go back to the previous screen
Select
Tap to select one fixture.
Hold and press another to select (or deselect) a
range of fixtures.
Used to link channels for colour selection and to
select channels when recording
Hue dial
Turn to adjust colour
Press to cycle through a series of colours.
Resets saturation If saturation is less than 100%
Saturation dial
Turn to adjust saturation (tint)
Press to alternate between full and 0%
saturation.
+
Shift + Hue
Fans colour across the selected fixtures. The
fan varies depending on which Hue dial you
use.
+
Shift +
Saturation
Fans saturation across the selected fixtures.
Fan varies depending on which Saturation dial
you use.
Clear
One press clears colour from selected channel.
Double press clears colour from all 12 fixtures,
even if they are not selected
Triple press clears all Intensity and colour
+
Shift + Clear
Resets all front panel controls to their default
state. Resets the fade and rate times, releases
all playback, un-gates faders and sets the 12
channel / scene faders to channel mode.
Stage
CL
User
Guide,
Version
0.4
3
‐
1
