6
GB
Connecting
Jamo D 8 is equipped with gold-plated terminals which will accept heavy stripped cables. Your local Jamo dealer can advise you on
which cables to buy. In general, the longer the cable, the higher quality should be used to avoid signal loss in the cable itself. In terms of
sound quality it is therefore an advantage not to use cables which are longer than required, although the cables used to connect each of
the speakers should be roughly the same length.
Single wiring
If you wish to use cables with stripped ends, proceed as follows
1. Turn off the amplifier.
2. Gently strip off approximately 15 mm of the insulation on
the cable ends - be careful not to damage the cable wires.
3. Twist the wires.
4. Turn the terminal screws counterclockwise until the twisted
wires can easily be inserted into the holes.
5. Turn the terminal screws clockwise to secure the cables in
the terminals.
NOTE:
Verify that the wires from the + and - cables do not touch
each other, as a short-circuit could damage the amplifiers
output stage.
Spikes
We recommend that you use the enclosed spikes (option supplied with D 870 + Stand 60). These ensure stability of the loudspeaker with
good mechanical contact to the surface, irrespective of the surface material used.
Always check that all spikes are adjusted so that the
loudspeaker sits without rocking, before the lock nuts are
tightened.
On hard surfaces (for instance wood or stone), D 870 can
be placed on the integrated console feet. If you use D 830
with Stand 60, the supplied rubber feet can be used to
protect the floor against the pointed spikes.
Note:
Never drag or push the loudspeaker across the floor after
mounting the spikes, as this will damage carpeting and
floorboards.
If you wish to connect each speaker with a single cable, the
supplied bridges should remain fitted between the two
sets of terminals.
The loudspeaker comes from Jamo with the bridges fitted
for single-wiring.
Single wiring, D 830
Single wiring, D 870
2
1
All manuals and user guides at all-guides.com
all-guides.com
