background image

5

GB

The cabinet itself is manufactured in 25 mm veneered MDF board which in addition is braced internally and carefully dampened with

acoustic absorption foam. The surface of the foam has been furnished with a “honeycomb” pattern to give it the largest possible surface

area and hence maximise dampening of the sound emitted from the rear of the unit.

Installation

Placing

Placing speakers in a listening room is always a very critical operation, and therefore we have provided a few guidelines below, but we

also recommend that you experiment with the placing until 

you

 think the sound reproduction is perfect.

In general, placing a loudspeaker near a rear and/or side wall will boost the low frequency level but at the same time create reflections

in the midrange and treble area, which results in a deterioration of the stereo perspective.

Therefore, it is not possible to recommend one perfect placing in relation to the rear wall, as the optimum distance will depend very

much on the acoustics of the listening room. As a guideline for placing D 830, the optimum placing will be about 30-60 cm / 12 - 25 in.

from the rear wall, and for D 870 it will be about 50-100 cm / 20 - 40 in.

For both models, the distance to the side walls should be at least 1 m / 40 in.

In order to achieve optimum sound reproduction, the distance between the loudspeakers should be the same as the distance from either

loudspeaker to your preferred listening position (an equilateral triangle).

The loudspeakers might be angled slightly toward the listening position, to adjust the treble level to suit the room acoustics and your

taste. This will also ensure that the optimum listening position becomes less critical.

There should be no furniture or other “obstacles” between the speakers and the listening position.

NOTE: If you are also using the D 8 loudspeakers in a surround sound configuration, the loudspeakers may be placed as near as approx.

15 cm / 6 in. from the television set without any discoloration of the picture.

Recommended placing of D 870

Recommended placing of D 830

Also, D 830 should be placed at the proper listening height. For

this specific purpose we have manufactured Stand 60. Using this

stand will ensure that the loudspeakers are placed at the optimum

listening height.

All manuals and user guides at all-guides.com

Summary of Contents for D 830















Reviews: