8
For Quick Reference, in “LOCATE COVER” screen:
1. For Automatic (RS), Short or Deep mode, go to line
and press the Left arrow button to change
between settings.
2. For Audio Feature – go to
and press the
Right arrow button once for beeps, twice for continuous
tone, and three times for audio off.
3. Material Options – Rebar (Post Tension Cable) / Conduit /
Copper.
System Menu
Using the Rebarscope® on Location
Removing the Lid
For ease of use in the field, the Rebarscope® lid can be
removed and the shoulder straps installed. To do so, fully open
the lid and the cover can be carefully pushed off of the case
hinge pins.
Attaching the Shoulder Support Straps
The Rebarscope® support straps can be used to hold the
Rebarscope® once the Rebarscope® lid has been removed.
When using the Rebarscope® support straps, make sure that an
eyelet hook is connected to each corner of the Rebarscope® .
Two of the hooks clip to the O-rings, while the other two clip
around the hinge pins.
Follow the step below:
1.
Attach the straight portion of the support strap to the
two front metal O-rings of the Rebarscope®.
2.
Attach the other two straps (which are stitched to the
straight portion of the harness) to the new exposed
hinges of the case.
3.
Pull the supplied support strap over your head so that
the rubber guard is resting on the back of the user’s
neck.
